diff --git a/CHANGELOG b/CHANGELOG
index 41040ef..5bc95fa 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,90 @@
+commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
+Author: Stefan Roese <sr@denx.de>
+Date:	Mon Jan 15 09:46:29 2007 +0100
+
+    [PATCH] Fix 440SPe rev B detection from previous patch
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a443d31410c571ee8f970da819a44d698fdd6b1f
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date:	Sun Jan 14 13:35:31 2007 +0100
+
+	[FIX] correct I2C Writes for the LM81 Sensor.
+
+	Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 0bba5452835f19a61204edcda3a58112fd8e2208
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date:	Sat Jan 13 11:17:10 2007 +0100
+
+    Undo commit 3033ebb2: reset command does not take any arguments
+
+    Haiying Wang's modification to the reset command was broken, undo it.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 95981778cff0038fd9941044d6a3eda810e33258
+Author: Stefan Roese <sr@denx.de>
+Date:	Sat Jan 13 08:01:03 2007 +0100
+
+    [PATCH] Update 440SP(e) cpu revisions
+
+    Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
+Author: Stefan Roese <sr@denx.de>
+Date:	Sat Jan 13 07:59:56 2007 +0100
+
+    [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
+
+    Now the board revision and the current PCI bus speed are printed after
+    the board message.
+
+    Also the EBC initialising is now done via defines in the board config
+    file.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 36adff362c2c0141ff8a810d42a7e478f779130f
+Author: Stefan Roese <sr@denx.de>
+Date:	Sat Jan 13 07:59:19 2007 +0100
+
+    [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
+
+    Now the board revision and the current PCI bus speed are printed after
+    the board message.
+
+    Also the EBC initialising is now done via defines in the board config
+    file.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
+Author: Stefan Roese <sr@denx.de>
+Date:	Sat Jan 13 07:57:51 2007 +0100
+
+    [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
+
+    Now the board revision and the current PCI bus speed are printed after
+    the board message.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
+Author: Reinhard Thies <Reinhard.Thies@web.de>
+Date:	Wed Jan 10 14:41:14 2007 +0100
+
+    Adjusted default environment for cam5200 board.
+
+commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date:	Wed Jan 10 15:35:52 2007 +0100
+
+    Update CHANGELOG
+
 commit 787fa15860a57833e50bd30555079a9cd4e519b8
 Author: Wolfgang Denk <wd@pollux.denx.de>
 Date:	Wed Jan 10 01:28:39 2007 +0100
@@ -12,6 +99,14 @@
     Also correct the decoding of the keypad status. With this update, the
     key that will trigger the update is Column 2, Row 2.
 
+commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
+Author: Marian Balakowicz <m8@semihalf.com>
+Date:	Wed Jan 10 00:26:15 2007 +0100
+
+    CAM5200 flash driver modifications:
+    - use CFI driver (replaces custom flash driver) for main 'cam5200' target
+    - add second build target 'cam5200_niosflash' which still uses custom driver
+
 commit 67fea022fa957f59653b5238c7496f80a6b70432
 Author: Markus Klotzbuecher <mk@denx.de>
 Date:	Tue Jan 9 16:02:48 2007 +0100
@@ -206,6 +301,14 @@
 
     Signed-off-by: Heiko Schocher <hs@denx.de>
 
+commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date:	Thu Dec 21 16:14:48 2006 +0100
+
+    [PATCH] Add support for the UC101 board from MAN.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
 Author: Bartlomiej Sieka <tur@semihalf.com>
 Date:	Wed Dec 20 00:29:43 2006 +0100